Filter
Top Products
112
ESC/VP21 Commands
Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message
is output and a ":" is returned.
* Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Item Command
Power ON/OFF ON PWR ON
OFF PWR OFF
Signal selection Computer1 Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
Computer2 Auto
SOURCE 2F
RGB
SOURCE 21
Component
SOURCE 24
BNC Auto
SOURCE BF
RGB
SOURCE B1
Component
SOURCE B4
Video1 SOURCE 45
Video2 SOURCE 41
S-video SOURCE 42
HDMI SOURCE 30
EasyMP(EB-
G5350/G5150 only)
SOURCE 50
A/V Mute ON/
OFF
ON MUTE ON
OFF MUTE OFF
A/V Mute
selection
Black MSEL 00
Blue MSEL 01
Logo MSEL 02
Item Command