Filter
Top Products
114
Regarding Network Projector (EB-G5350/G5150 only)
There are two methods connecting the projector to a computer via a
network and project images from the computer screen.
• By "EMP NS Connection"
The EMP NS Connection application on the supplied EPSON Projector
Software for Meeting&Presentation provides a wide range of features for
use in meetings and presentations, such as a distribution function, multi-
screen display, movie sending mode, and a presentation mode. By using
"EMP NS Connection", you can not only project, but also hold successful
meetings and make presentations simply by connecting the projector to a
computer. s EasyMP Operation Guide
• By "Network Projector"
"Network projector" is a standard function in Windows Vista. Therefore,
you can project images from the computer by detecting the projector on
the network only by using a function of the OS without having to install
any special software.
This section provides an easy explanation of "Network Projector".
Check that the projector and computer are connected to the network,
and carry out the following operations.
A
Turn the projector on, and then press the [EasyMP]
button on the remote control.
B
On the computer, start Windows, and then click
"Start" - "All programs" - "Accessories" - "Network
projector".
The connection setting screen is displayed.
The projector is identified by inputting its IP address, or by
allowing the OS to automatically identify all of the connected
projectors.
C
Once the OS has identified all of the connected
projectors, select the one that you want to use and
click "Connect".
When the projector password screen is displayed, enter the
Projector keyword shown at the bottom of the EasyMP standby
screen. s EasyMP Operation Guide "Preparing the Projector"
Compatible OS
Windows:Vista Home Premium/Vista Business/Vista Enterprise/Vista Ultimate
Via a network you can project by
connecting one computer to one
projector.
Internet
LAN
Procedure
q
When using "Network Projector" from "Options" in
Windows Meeting Space, set the colors for the computer
screen you are using to the highest level (32bit). If it is not
capable of a 32bit display, a message is displayed and you
cannot connect.