Filter
Top Products
7
Part Names and Functions
Front/Top
The illustration shows a standard lens attached.
Name Function
A
Lamp cover Open this cover when replacing the projector's
lamp. s p.85
B
Air exhaust vent Air is used to cool the insides of the projector
and vented through this opening.
Caution
Do not place objects that may become warped
or otherwise affected by heat near the air
exhaust vent and do not put your face or
hands near the air exhaust vent while
projection is in progress.
C
Front adjustable
foot
Extend and adjust the position of the projected
image when the projector is placed on a
surface such as a desk. s Quick Start Guide
D
Foot adjust lever Pull out the foot lever to extend and retract the
front foot. s Quick Start Guide
E
Zoom ring Adjusts the image size. s Quick Start Guide
F
Projection lens Images are projected through here.
G
Lens unit removal
button
Press this button to remove the lens unit when
replacing lens units.
H
Remote Receiver Receives signals from the remote control.
s Quick Start Guide
I
Focus ring
Adjusts the image focus.
s
Quick Start Guide
J
Air filter tab When cleaning or replacing the air filter, use
this tab to pull out the air filter. s p.81, p.88
K
Status indicators The color of the indicators and whether they
are flashing or lit indicate the status of the
projector. s p.67