Filter
Top Products
37
Turning On the Power and Projecting Images
Procedure
1
Turn on the power for all equipment connected to the projector.
For a video source, press the [Play] button at the video source to start
playback if necessary.
2
Check that the operation indicator
has stopped flashing and lights
orange.
3
If using the remote control, set the
R/C switch on the remote control to
the ON position.
4
Press the [Power] button on either
the remote control or the
projector's control panel to turn on
the power for the projector.
The operation indicator flashes green, and
after a short period projection starts.
Depending on the settings, the message
"No-Signal." may appear. (P. 7 0 )
5
Check that the operation indicator
has stopped flashing and lights
green.
Tip :
The projector buttons cannot be operated while the
operation indicator is flashing green. Wait until it
lights steadily.
Operation indicator lights orange
Power
A/V Mute
Freeze
E-Zoom
Power
Sync+
Tracking - Tracking +
Menu Esc
Help
Computer/YCbCr
Video
A
to
Source
Projector
Remote control
Operation indicator stops
flashing and lights green