Epson EMP-800UG Projector User Manual


 
60
This function lets you simultaneously display computer or component video
images on the main screen and video images (Video or S-Video) in a sub-
screen. The video images in the sub-screen can be selected using the P in P
command in the Setting menu. (P.70)
Tip :
• The P in P function cannot be used if the refresh rate for the computer images is set to
interlaced.
• The P in P function cannot be used when TV (525i) component video images are being
projected.
Procedure
1
Connect all components, set the
type of sub-screen using the
Setting menu, and then press the [P
in P] button on the remote control.
The sub-screen will appear at the top-right
of the screen, and the operation guide will
appear at the bottom-left of the screen.
2
Tilt the button on the remote
control to change the position of
the sub-screen.
3
Press the [E-Zoom] button on the remote control to change the
size of the sub-screen.
Picture in Picture (P in P)
Functions for Enhancing Projection