Filter
Top Products
73
•The About menu shows the setting details for the current video source.
•The Lamp setting appears as 0H for 0 – 10 hours, after that, it appears in
units of 1 hour.
Computer (Digital-RGB, Analog-RGB, RGB-Video, YCbCr, YPbPr)
About menu
Main menu Sub-menu Function
Default
setting
About Lamp Displays the cumulative lamp operating time.
• When the lamp warning period is reached, the
display characters appear in red.
0H
Reset Lamp
Timer
Initializes the lamp operating time. When this
command is selected, the cumulative lamp operating
time is reset to the initial default value.
-
Video Source Displays the input source which is currently being
projected.
Input Signal Displays the input signal settings.
Frequency Displays the horizontal scanning frequency.
SYNC Polarity Displays the synchronization polarity. -
SYNC Mode Displays the synchronization attributes. -
Resolution Displays the input resolution. -
Refresh Rate
Displays the refresh rate. -
Computer