Epson EMP-800UG Projector User Manual


 
86
Are the cables connected correctly?
(P.19 – P.33)
Has the correct resolution been selected?
Set the computer so that the signals that are output are
compatible with this projector. Refer to the documentation
provided with your computer for details on changing the
settings. (P.106)
Have the synchronization
, tracking and display
position been adjusted correctly?
Press the [Auto] button to adjust these settings. You can
also use the menus to make the adjustment. (P.46, 63)
Is an extension cable being used?
If an extension cable is used, electrical interference may
increase. Use the accessory cables provided, or connect a
signal amplifier and see if this helps.
Are the image signal format settings correct?
Use the Video Signal command in the Video menu to
select the video signal format. The projector may not be
able to automatically identify some types of video signal
that are input. (P.66)
Does the input signal match the connected source?
Use the Comp1 Input or Comp2/YCbCr Input command
in the Setting menu to select the signal format that matches
the connected source.
For Comp1: Digital-RGB,Analog-RGB,RGB-Video
For Comp2: Analog-RGB,RGB-Video,YCbCr,YPbPr
(P.70)
Image is distorted
Image contains
interference
Troubleshooting