Filter
Top Products
57
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
"Audio" Menu
Sub-menu Function Default
Volume Adjusts the volume. Median value
(10)
Audio
Input
Selects the input source (port) for audio signals at the rear of
the projector.
The default setting varies depending on the type of signal
being input (for computer, RGB video and component video
input signals: Audio1; for video and S-Video input signals:
Audio2) Therefore, if audio signals are being input to a
different port from the default port, you will need to select
the audio signal input source.
Depends on
connection
Reset Resets all adjustment values for the "Audio" menu functions
to their default settings.
•Press the [Enter] button on the remote control to reset the
settings.
•Select "Reset All" to return all settings for menus such as
"Image" and "Audio" to their default settings. p.65
-
TIP
The "Audio" menu settings are saved individually for each input signal source.