Filter
Top Products
90
Saving a User's Logo
You can record the image that is currently being projected as a user's logo.
PROCEDURE
Project the image that you would like to use as a
user's logo, and then press the [Menu] button.
Select the "User’s Logo" menu, and then press the
[Enter] button.
Select "Yes" in the sub-menu, then press the [Enter]
button.
TIP
When a user's logo is recorded, the previous user's logo will be
erased.
1
Remote Control
2
TIP
•If the "User’s Logo Protect" function of "Password Protect" is set to
"ON", a message is displayed and the user's logo can not be
recorded. To record a user's logo, set "User’s Logo Protect" to
"OFF" first. p.29
•If keystone correction or E-Zoom have been carried out, they will be
cancelled when the "User’s Logo" menu is selected.
3
TIP
When you press the [Enter] button, the images will be displayed at the
original image signal resolution, so that if you are projecting images
that have a resolution that is different from the number of pixels on
the projector's panel, and if you are projecting video images, the
display size will change.