Epson emp - 820 Projector User Manual


 
103
List of ESC/VP21 Commands
Command List
When a power ON command is sent to the projector, the power for the projector
turns on. When the projector is in a command ready state, it returns the '3Ah' (:)
code. Furthermore, when command processing is complete, the projector also
returns a ":" code.
The ":" code status can be used to determine whether the projector is ready or
busy. If command processing terminates with an error, an error message is
output and then the ":" code is sent.
Item Command
Power ON/OFF
ON PWR ON
OFF PWR OFF
Signal selection
Computer1 (Analog-RGB) SOURCE 11
Computer1 (Digital-RGB) SOURCE 12
Computer1 (RGB-Video) SOURCE 13
Computer2/Component Video (Analog-RGB) SOURCE 21
Computer2/Component Video (RGB-Video) SOURCE 22
Computer2/Component Video (YCbCr) SOURCE 23
Computer2/Component Video (YPbPr) SOURCE 24
Video SOURCE 41
S-Video SOURCE 42
A/V Mute ON/OFF
ON MUTE ON
OFF MUTE OFF
A/V Mute selection
Black MSEL 00
Blue MSEL 01
User's Logo MSEL 02