Epson emp - 820 Projector User Manual


 
31
Projecting Component Video Images
Use the optional component video cable to connect the video source to the
Computer 2/Component Video port at the rear of the projector.
See “Appendix: Optional Accessories” (P.100)
If you would like the sound to come out of the projector's built-in speaker, use
the accessory A/V cable (red/white) to connect the video source to the Audio
2 port at the rear of the projector. Alternatively, use a commercially-available
audio cable to connect the video source to the Audio 1 port at the rear of the
projector. Use either method depending on the shape of the video source’s
audio output port and on the type of cable you have.
Tip :
• After making the connections, change the Comp2/YCbCr Input in the Setting menu to
either "YCbCr
" or "YPbPr " to match the signals from these devices. (P.69)
For HDTV (750P or 1125i), "YPbPr" will be selected regardless of the above setting.
• After making the connections, change the Audio Input setting in the Audio menu to
either Audio1, Audio2 or USB, depending on which input port you are using.
Component video
cable (optional)
To Computer 2/Component
Video port
A/V cable (white/red)
(accessory)
When connecting the audio output using an A/V cable
To video output
port
To audio output L port (white)
To audio output R port (red)
To Audio 2 port
(white/red)
Audio cable (commercially-available)
To Audio 1 port
When the video equipment's audio output port is a stereo mini jack
To audio output
port
To video output
port
Component video
cable (optional)
To Computer 2/Component
Video port