Epson emp - 820 Projector User Manual


 
47
Tip :
• The [Auto] button on the projector's control panel does not work while a menu or help
screen is being displayed. To use the [Auto] button on the projector's control panel, you
need to first exit the menu or help screen. Alternatively, you can use the [Auto] button
on the remote control instead.
• If you use the remote control to activate the automatic adjustment function while the E-
Zoom, A/V Mute or Picture in Picture functions are in use, the functions being used will
be canceled before automatic adjustment is carried out. If the [Auto] button on the
projector’s control panel is pressed, automatic adjustment will not be carried out if the
E-Zoom or Picture in Picture function is being used.
• Automatic adjustment may not work properly with some types of signals which are
output by computers. In such cases, you may need to adjust the tracking and
synchronization manually.
If vertical stripes appear in the projected images,
and this cannot be fixed using automatic
adjustment. You will need to adjust the tracking
manually using the following procedure.
Procedure
While holding down the [Shift] button
on the projector's control panel, press
the [Tracking +] button.
The tracking value will increase by one setting
each time the [Tracking +] button is pressed.
[While holding down the [Shift] button
on the projector's control panel, press
the [Tracking -] button.
The tracking value will decrease by one setting
each time the [Tracking -] button is pressed.
Tip :
The image will flash when continuous tracking
adjustment is carried out, but this is normal.
Adjusting the tracking
Resi e
Sync+
Tracking - Tracking +
Sync-
Keystone
Shift
Auto
Projector
Ri
Sync+
Tracking - Tracking +
Sync-
Keystone
Shift
Auto
Projector