Filter
Top Products
If you still have trouble with your hard disk, you can back up
your data and physically reformat the disk. Then you’ll need to
reinstall the operating system and copy your files back onto the
disk. See your operating system manual for instructions.
If you cannot access data on your hard disk or you are
receiving read/write errors, the disk may have a physical
problem. Contact the Epson Connection for assistance.
Software Problems
If you have trouble with an application program, try the
following:
1.
If the application program does not start, check
that you
are
following the correct procedure for starting the program,
and
that
it is installed correctly. If you have a hard disk and
the program is stored in a directory on that drive, make
sure you are logged onto or specifying the correct directory.
If you don’t have a hard disk, make sure you inserted the
correct diskette in drive A.
2.
Your computer can run at fast or slow speed. While almost all
programs work properly at the faster speed, some must run
at the slower speed. Check your software manual to see if
this is
the
case, and change the processor speed if necessary.
See “Changing the Processor Speed” in Chapter 3 for
instructions and information on using copy-protected
programs.
Troubleshooting
6-17