Filter
Top Products
Before you install SIMMs, check the following guidelines to
ensure that they will work properly:
q
Use only 36-bit, 72-pin, fast-page mode SIMMs that operate
at an access speed of 70ns (nanoseconds) or faster. Be sure
all the SIMMs operate at the same speed.
q
Your computer can use any SIMM that complies with
industry standards; however, it is best to use Epson SIMM
option kits to ensure reliability and compatibility.
lnserting SlMMs
Follow these steps to install SIMMs:
1.
Refer to the illustration on page 4-3 to locate the SIMM
sockets near the front of the computer.
2.
Remove any option cards that may be blocking your access to
the SIMM sockets. See page 4-19 for instructions.
3.
Position the SIMM over the socket at an angle, as shown
below. The components on the SIMM should face the
outside of the computer.
Installing and Removing Options
4-11