Filter
Top Products
Chapter 6 Troubleshooting
103
Turn off the printer. Clean the paper path inside the printer using
a soft, dry, lint-free cloth.
Clean the internal printer components by printing three pages
with only one character per page.
There may be a problem with the developer cartridge. Remove
the cartridge and shake it gently from side to side and then from
front to back to distribute the toner evenly, then reinstall it. If this
does not solve the problem, see “Replacing the Developer
Cartridge” on page 77.
You may need to replace the photoconductor unit. See “Replacing
the Photoconductor Unit” on page 82 for instructions.
❏
Your paper may be moist or damp. Do not store paper in a
humid or damp environment.
❏
Make sure the paper type is correct.
❏
Check that the Toner Save mode is turned on.
❏
Confirm that the density setting is light.
❏
Turn off the printer. Take out the developer cartridge, shake
it gently from side to side and then from front to back to
distribute the toner evenly, and then reinstall it.
If this does not solve the problem, install a new cartridge. For
more information, see “Replacing the Developer Cartridge” on
page 77. Then print several pages to check the print quality.
Black or white bands appear in the printout
Uneven image density