Filter
Top Products
Chapter 3 Using the Printer Driver
51
Using the ECP mode
To use the ECP mode with a parallel (IEEE 1284-B compliant)
connection, your computer must support ECP mode.
To use the ECP mode, follow these steps:
1. Make the ECP mode settings in the BIOS setting program that
comes with your computer. (For details of the settings and the
program, see your computer manual.)
2. Click the
Start
button, point to
Settings
, and then click
Control Panel
.
3. Right-click the
System
icon, and click
Open
in the menu that
appears.
4. Select the
Device Manager
tab.
5. Select
ECP Printer Port
under Ports [COM & LPT], then click
the
Properties
button.
6. Select the
Resources
tab.
7. Make the appropriate setting in the Resource settings dialog
box. (This setting depends on your computer system. For
details, see your computer manual.)
8. Click
OK
to save the settings.