Filter
Top Products
Chapter 6 Troubleshooting
106
Lighten the
Density
setting in the printer driver.
If the problem persists, see Chapter 5, “Replacing Consumables.”
Toner may have spilled onto the paper feed path. Turn off the
printer. Remove the developer cartridge and the photoconductor
unit and then clean the paper path inside the printer using a clean,
dry, lint-free cloth.
w
Warning:
Opening the printer exposes the fuser, which is marked by a
CAUTION Hot Surface Avoid Contact
label. Be careful not
to touch the fuser. If the printer has been in use, the fuser may be
very hot.
The image is too dark
Non-printed side of the page is dirty