Filter
Top Products
Chapter 4 Installing and Removing Options
72
If an incorrect amount of memory is shown on the status sheet,
turn off the printer and review the steps above to make sure you
correctly installed the SIMM. If the amount of memory is still
incorrect, contact your dealer or a qualified service representative
for assistance.
If your computer is running Windows Me, 98, 95, 2000 or NT 4.0,
you can also confirm that the memory module is correctly
installed by checking the information displayed in the Optional
Settings tab of the printer driver.
Removing
Follow the instructions below to remove the SIMM:
1. Make sure that the printer is not plugged in.
2. Press the latch on the left side of the printer, then raise the
printer cover.