Filter
Top Products
Chapter 5 Replacing Consumables
82
11. Click
OK
to reset the toner level counter.
Whenever you replace the developer cartridge, you should clean
the paper roller as described in “Cleaning the Printer” on page
113.
Replacing the Photoconductor Unit
1. Make sure the printer is turned off.
2. Make sure the output tray at the top of the printer is lowered.
3. Open the printer cover by pressing the latch button on the left
side of the printer and lifting the cover up all the way.
c
Caution:
You must completely open the printer cover to replace the
photoconductor unit; otherwise, you may damage the
printer.
4. Remove the developer cartridge.