Filter
Top Products
Maintenance and Transportation 181
R4CE640
long.bk Rev. E
A5 size MAINT.FM
6/10/04
R
Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
8
8
8
8
8
8
8
8
8
8
8
8
If a consumable product reaches the end of its service life, the
printer stops printing and displays the following messages on the
LCD panel or the window of EPSON Status Monitor 3. When this
happens, the printer cannot resume printing until you replace the
depleted consumable products.
* The letters C, M, Y, and K appear in this position, indicating the color of the
toner to be replaced. For example, the message Y Toner Low means that
the amount of toner remaining in the yellow toner cartridge is low.
Note:
Messages appear for one consumable product at a time. After replacing
a consumable product, check the LCD panel for replacement messages
for other consumable products.
Toner Cartridge
Handling precautions
Always observe the following handling precautions when
replacing toner cartridges.
❏ Installing a genuine toner cartridge is recommended. Using a
non-genuine toner cartridge may affect print quality. EPSON
shall not be liable for any damages or problems arising from
the use of consumable products not manufactured or
approved by EPSON.
LCD Panel Message Description
Replace Toner xxxx* The indicated toner cartridges are empty.
Replace Photocondctr Printing has stopped to avoid damage to the
engine.
Replace Transfer Unit The transfer unit has reached the end of its
service life.