Filter
Top Products
256 Troubleshooting
R4CE640
long.bk Rev. E
A5 size TROUB.FM
6/10/04
L
Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
If Off is selected as the Auto Cont setting on the control panel’s
Setup Menu, press the N Start/Stop button to print on the back of
the next sheet, or press the q Cancel Job button to cancel the print
job.
If On is selected as the Auto Cont setting on the control panel’s
Setup Menu, printing continues automatically after a certain
period of time.
Face Down Full
The output tray is full of printouts, and the printer has stopped
printing. Remove the printouts from the output tray, and press
the N Start/Stop button to continue printing. The output tray can
hold up to 250 sheets.
Form Feed
The printer is ejecting paper due to a user request. This message
appears when pressing the N Start/Stop button once to make the
printer offline, and then holding down the N Start/Stop button
for more than 2 seconds in order not to receive form feed
command.
Image Optimum
There is insufficient memory to print the page at the specified
print quality. The printer automatically lowers the print quality
so that it can continue printing. If the quality of the printout is not
acceptable, try simplifying the page by limiting the number of
graphics or reducing the number and size of fonts.
To clear this error, select Clear Warning from the control panel’s
Reset Menu. See “How to access the control panel menus” on page
147 for instructions.
You may need to increase the amount of printer memory to be
able to print at the desired print quality for your document. For
more information on adding memory, see “Memory Module” on
page 170.