Filter
Top Products
1 • Setting Up the Projector
40
Connecting to a PowerBook
Your PowerBook must have video-out capability in order to connect to
the projector.
To connect the projector to your PowerBook, you need to:
● Connect the projector video cable
● Connect the mouse and/or serial cable (if you want to use the
remote control as a mouse or use the ELP Link III software)
● Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to connect.
Before beginning, turn off the projector and computer if they are on.
Note: PowerBook configurations vary, so the location of your computer’s
ports may not match the illustrations. See your PowerBook manual for the
port locations if necessary.
5300.book Page 40 Tuesday, April 13, 1999 4:19 PM