Filter
Top Products
Connecting to a Computer
49
Connecting to a High-End Workstation
The PowerLite 7200 and 7300 are capable of remapping input
resolutions up to 1280
× 1024 pixels. Since 1280 × 1024 pixels is the
default resolution for most leading workstations, this capability makes
these projectors the best portable solution for the display of
workstation video output.
There is no standard for workstation video output. Those workstations
that follow the SXGA standard and use the HD15 connector don’t
need an adapter cable. The most popular workstations use a 13-pin
13W3 connector, which requires an adapter cable (ELPKC06).
In addition, workstations pass the sync (synchronization) signal
differently, so the ELPKC06 adapter cable has a DIP switch to control
sync routing. Contact your audio/video dealer for information on
connecting your workstation.
Connecting to a Video Source
You can connect a VCR, a camcorder, a laser disc player, DVD player,
or any other compatible video image source to your projector.
The projector can receive composite video, S-Video, or component
video. Your equipment has composite video if your video source has a
one-pin RCA video jack. Your equipment has S-Video if your video
source has a four-pin (mini-DIN) video jack. Your equipment has
component video if your video source has a three-connector (Y, R-Y,
B-Y) video jack.
Note: The projector is not compatible with a cable TV-style F connector.
5300.book Page 49 Tuesday, April 13, 1999 4:19 PM