Filter
Top Products
Presenting Through a Wireless Network 53
2. To select Config, press the Enter button on the remote control.
3. Highlight
Basic under Wireless LAN and press Enter.
You see the following screen:
Make sure
Easy connect mode is selected, as shown above.
If not, use the pointer button on the remote control to
highlight the checkbox next to
Easy connect mode, then press
Enter to select it.
4. Make sure the projector has a unique name, so you can identify it
when connecting to it from your computer.
If you need to rename it, highlight the
Projector name text box
then press
Enter. The text box turns yellow to indicate you are in
input mode.
Press the pointer button up to select individual letters in
alphabetical order, or down to select letters in reverse order; then
press the pointer button to the right to move to the next
Easy connect
mode
note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, use the numeric
keypad while holding down
the
Num button on the
remote control.
Banff-Toronto User's Guide.book Page 53 Thursday, January 20, 2005 5:00 PM