Filter
Top Products
80 Presenting Through a Wireless Network
Connecting in IP Connect Mode
You can establish a connection manually using IP Connect Mode
even if your projector and computer are on a different subnet (Access
Point mode only) or connecting over different routers.
1. Start NS Connection (see page 74). You see this screen:
2. Click the
Extension button. You see this screen:
note
Depending on your network,
your projector and computer
may connect over different
routers even if they are in
the same room. Try this
method if you are unable to
connect automatically.
Click here
Select this box
Banff-Toronto User's Guide.book Page 80 Thursday, January 20, 2005 5:00 PM