Filter
Top Products
72 Presenting Through a Wireless Network
■ For 64 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
■ For 128 bit WEP encryption with ASCII or text input, enter
13 alphanumeric characters.
■ For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
6. When you’re done making settings, highlight the
OK button at
the top of the screen and press
Enter.
Adding WPA Security
When you click the Security button on the Network screen, you see
this screen:
1. Highlight
WPA and press Enter.
2. Highlight the
PSK (pre-shared key) text box and press Enter. The
text box turns yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in alphabetical
order, or down to select letters in reverse order; then press the
pointer button to the right to move to the next character
position. When done typing the key, press
Enter.
note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, use the numeric
keypad while holding down
the
Num button on the
remote control. Press the
Num button again to exit
numeric keypad mode.
Banff-Toronto User's Guide.book Page 72 Thursday, January 20, 2005 5:00 PM