Filter
Top Products
Use the following part numbers when ordering:
Paper or other media Size Part number
Special coated paper for
720 dpi
Letter (8.5 × 11 inches)
Legal (8.5 × 14 inches)
S041062
S041048
Special coated paper for
360 dpi
Letter (8.5 × 11 inches) S041060
High-quality glossy paper Letter (8.5 ×11 inches) S041072
Transparency film Letter (8.5 ×11 inches) S041064
Setting the Paper Thickness and Adjustment Levers
Before you start printing, you should check the paper thickness
and adjustment levers to make sure they are set correctly for
the type of paper or other media you are loading.
c
Caution:
Before you change the lever settings, make sure there is no
paper in the paper path and that printing is paused. To do this,
press the
Pause
button or turn off the printer.
Setting the Paper Thickness Lever
The paper thickness lever on the right side of the sheet feeder
has two settings: plain paper and thick paper. Set the lever to
the position that best suits the paper or other media you plan
to use, as shown in the following table and illustration.
Paper type Paper thickness lever position
Standard paper Plain paper
Transparency film Plain paper
Envelopes or labels Thick paper
Paper Handling
1-3