Filter
Top Products
❑ Network interface mode. If you’re having trouble printing
when the printer is connected to multiple computers, turn
on network interface mode. By default, network interface
mode is off.
❑ Loading position. Determines the top margin by defining
how close to the paper edge the first line can print. The
loading position can be 3 mm (default) or 8.5 mm.
Normally you should use your software to adjust your top
margin.
❑ Thick paper. Select Index card (portrait) or Envelope
(default) if you print on these media.
To turn on Default setting mode and print instructions, turn off
the printer. Then hold down the
Economy/Condensed
button while you turn the printer back on. Follow the
instructions the printer prints to change the default settings by
pressing the buttons on the control panel. When you are
finished, press
Pause
and turn off the printer to exit Default
setting mode. (If a partial page feeds before you press
Pause
,
press
Load/Eject
to clear the paper path.)
Controlling the Printer
2-9