Filter
Top Products
Calibrating the Printer When Printing from DOS
If vertical lines are misaligned when you print from DOS
applications, you may need to calibrate the printer using its
adjustment mode. To verify that your printer needs calibrating,
print a demonstration page as instructed on page 2-7. Examine
the demonstration printout; if vertical lines are misaligned,
calibrate you printer. Do not calibrate your printer too often.
Follow these steps:
1. Make sure paper is load in the printer and turn it off.
2. Hold down the
Pause
button and turn on the printer to
enter printer adjustment mode. It prints a multilingual
instruction sheet.
3. Follow the instructions on the sheet to calibrate your printer.
4. When you are finished, press
Pause
and turn off the printer
to exit printer adjustment mode.
When you turn on the printer and send your next print job, the
lines should be aligned.
3-10
Maintenance