Filter
Top Products
Printing has stopped and the
Pause
light is on.
Printing is temporarily suspended. Press the
Pause
button to
continue.
Printing has stopped but the
Pause
light is off.
One or both ink cartridges may be empty or too old. A
cartridge is too old if it has been used longer than six months or
beyond the date on its packaging. First clean the print heads as
described earlier in this chapter. If this does not solve the
problem, replace the ink cartridges.
c
Caution:
If you replace an ink cartridge before its
Ink Out
light flashes,
the sensor that tells you when the ink is out will not work with
the new cartridge.
If pressing the
Pause
button does not turn on the
Pause
light,
turn off your printer and disconnect the interface cable. Then
reconnect the cable and turn on the printer.
The cable between the printer and computer may not meet
the specifications for the printer or computer. See “System
Requirements” in your
Setup and Software Guide
for cable
guidelines.
Turn off the printer and perform a self test as described in
Chapter 1 of your
Setup and Software Guide
. If the self test does
not print, the problem is with the printer. If the self test prints
correctly, the problem is probably caused by your software.
The
Ink Out
OO
or
Ink Out
NNNNNN
light flashes or remains on and
the printer does not print.
One or both ink cartridges are low on ink or empty; replace the
indicated cartridge as described in Chapter 3.
Troubleshooting
4-7