Filter
Top Products
Understanding SCSI Connections Page 19
Settin
g
the SCSI ID Number
The scanner’s default SCSI ID number is 2. If you add the scanner to a
system in which one of your SCSI devices already uses SCSI ID 2, you
can change the ID number to an unused number using the rotary switch
at the rear of the scanner. See the table on the next page for a guide to
SCSI ID numbers. Then follow these steps to change the ID number:
1
Turn the scanner off.
2
Use the rotary switch at the back of the scanner to change the SCSI ID
number.
3
Turn the scanner back on.
4
Restart your computer.
Make sure the
scanner is turned off
before changing the
SCSI ID number.
Do not set the SCSI
ID to an ID number
that is already
assigned to another
device. Otherwise the
computer, scanner,
and other devices will
not operate properly.
If you are using
Windows 98, see
Changing the SCSI ID
Number in
Windows 98 for more
information.
0
1
2
3
4
5
6
7
SCSI
ID
OPTION
TERMINATOR
SW
LOCK
UNLOCK
ON
OFF
ON
OFF
7
6
1
2
4
5