Filter
Top Products
Specifications Page 75
SCSI Interface
Interface type ANSI Standard X3.131-1994 (SCSI 2)
Functions BUS FREE phase
ARBITRATION phase
SELECTION/RESELECTION phase
COMMAND phase
(the Logical Unit Number is fixed at 0 and the Command Link Function
is not supported)
DATA phase
DATA IN phase
DATA OUT phase
STATUS phase
MESSAGE phase
MESSAGE IN phase
MESSAGE OUT phase
ATTENTION condition
RESET condition
Logic level TTL compatible
Electrical standard ANSI Standard X3.131-1994 (SCSI 2)
ID setting Can be set from 0 to 7 (factory setting is 2); asterisk (*) setting is only
used when transporting the scanner