Filter
Top Products
Using Optional Equipment Page 27
Removin
g
the Shi
pp
in
g
Screw
To prevent damage during shipping, a shipping screw is attached to the
TPU to secure its lamp assembly. You must remove this screw before
using the TPU.
1
Turn the TPU so the glass side faces up.
2
Use a Phillips head (cross head) screwdriver to remove the shipping
screw from the hole labeled CLAMP, as shown below.
3
Install the screw in the storage hole labeled STOCK.
You may damage the
TPU if you try to use it
without removing the
screw from the hole
labeled CLAMP.