Filter
Top Products
4. Press the spacebar. The Supervisor Password IS option
is now set to Enabled.
To set a User password, select the Set User Password
option and follow the steps above.
Deleting passwords
To delete your passwords, follow these steps:
1.
Set the Password on boot option to Disabled.
2.
Delete the User password by pressing Enter for both the
password field and the confirmation field. Don’t type any
characters in these fields.
3.
Then delete the Supervisor password the same way.
Note
You must delete the User password before SETUP will allow
you to access the Supervisor password.
If you have forgotten your password(s), see “Password
Problems” in Chapter 5.
Using the virus protection features
Several options on the Security and Anti-Virus screen allow
you to define system protection features.
The Diskette Access option allows you to restrict access
to your diskette drives based on the password levels you have
defined. This prevents unauthorized users from accessing the
drives and possibly introducing a virus to your system. You
can restrict diskette access only if passwords are enabled and
you have enabled the Password on boot option.
1-16
Setting Up your System