3.
4.
5.
6.
7.
8.
Remove the cache chips from their package and inspect
them. The pins should point inward at slightly less than a
90° angle.
If any of the pins are bent or crooked, straighten them gently
with your fingers or with small tweezers to align them with
the other pins. Be careful when you do this; the pins are
fragile and can break off easily.
Position one of the cache chips over the first socket as shown
below, aligning the pins on the chip with the holes in the
socket. Make sure the small notch on the end of the chip is
aligned with the corresponding notch on the socket.
U26
U25
U24
U23
Gently press the chip halfway into the socket (to make sure