Filter
Top Products
Epson SureColor T-Series User’s Guide
Basic Operations
30
6
Lower the roll paper lock lever, and then press
the Z button.
When the Auto Loading setting is set to Off on
the T7270/T5270/T3270 or T7270D/T5270D,
you can cut the edge of the roll paper with the
built-in cutter by pressing the Z button, and
then pressing the ) button within 5 seconds.
7
Close the roll paper cover.
8
Check the media type.
If an identification barcode is printed on the
roll
When the paper is loaded, the barcode is read
automatically, and the Media Type and Roll
Paper Remaining settings are configured
automatically.
After Ready is displayed, you can print.
If an identification barcode is not printed on
the roll
The display shows the Media Type currently
selected with the printer.
To print with the displayed settings, use the d/u
buttons to select Keep Settings Above, and
press the Z button.
To change the settings, select Change Settings,
and press the Z button.
U“Viewing and Changing Media Settings” on
page 43
Note:
When the optional Multifunction Scanner has
been raised upon loading roll paper, make sure to
return the scanner back in place for use.