Filter
Top Products
Epson SureColor T-Series User’s Guide
Copying and Scanning
75
2
With the side of the document to be read facing
up, align the right edge of the document with the
loading guide.
3
Insert the document horizontally so that the
entire edge touches all inner rollers.
If the edge touches the roller, the document is
fed to the read start position automatically.
After automatic loading starts, release your
hand and do not obstruct the loading of the
document.
4
After the document has been loaded, remove the
loading guide, and then make sure the left edge
of the document and the guide line are aligned.
If the document is copied or scanned with the
loading guide still attached, the edge of the
document may be damaged.
Large Copying
This section describes the procedure to copy on the
control panel of the printer.
Copies are printed along the following loading paths
depending on the model you are using.
O T7270/T5270/T3270
Loaded roll paper or cut sheet
c
Important:
If the document slants greatly from the
guide line, the slanted and protruding
section is not copied or scanned. Press the
r button to eject the document, and then
reload the document.
Note:
If the document is 1 m or longer, support it with
your hands so that it does not slant during
reading.