Filter
Top Products
7. (Optional) In NDS Settings, Select NetWare file server(s), NetWare 4.x or later that print server
can do NDS mode.
8. Click OK. From your NetWare client computer, such as Windows 95/98/Me, create a printer
that is connected (redirected) to one of the NetWare print queues serviced by the print
server.
Properties –TCP/IP Options
The TCP/IP options allow you to modify the print server’s TCP/IP settings. Each option is detailed
as follows.
Obtain an IP address from a DHCP server:
This option enables or disables the DHCP feature of the print server. When this option is enabled,
the print server will obtain an IP address automatically from the DHCP server on your LAN. The
default value is “Disable”.
Note: 1.Once this option is enabled, the following IP address, Subnet Mask, Gateway will be
grayed out and are not available for editing.
2.While the print server supports DHCP, we strongly recommend you manually specify a fixed IP
address to the print server.
Specify an IP address:
IP Address: This option shows the print server’s current IP address maybe obtained from your
DHCP server or manually specified. This option also allows you to manually
specify an IP address to the print server, if DHCP option is disabled.
Subnet Mask: This option shows the print server’s current subnet mask maybe obtained from the
DHCP server or manually specified. This option also lets you manually
specify a subnet mask to the print server, if DHCP option is disabled. This
value is optional.