Filter
Top Products
Introduction
A description of each connector is provided in the table below (from left to
right):
Table 2 Connectors
Label Description
Power input for connecting the power supply adapter.
10-28 VDC
Button used to restore the Ericsson W20 configuration to
factory default settings. The following procedure resets all
configurable values back to factory default, including the
Ericsson W20 login user name and password.
Reset
1. Disconnect the power cable from the Ericsson
W20.
2. Press and hold the Reset
button with the tip of a
pen and then reconnect the power cable. Keep the
button pressed for at least 20 seconds.
3. The Ericsson W20 restarts and comes online with
the factory default settings.
USB connectors, for connecting the Ericsson W20 to USB
devices.
USB
Ethernet LAN connectors (RJ45), for connecting the
Ericsson W20 to client PCs or an Ethernet switch/hub.
LAN 1 - 4
4 1/1551-CRH 102 167 PA15 2006-08-16