Filter
Top Products
PC Configuration
4 Ensure that the Internet Protocol TCP/IP check box is selected and
click Properties .
5 In the Internet Protocol (TCP/IP) Properties window, select Obtain
an IP address automatically and Obtain DNS server address
automatically.
6 Click OK twice to confirm your changes and close the windows, and
then close the Control Panel window.
Windows
2000
First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the Start button, point to Settings, and
then click Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network
and Dial-up Connections window, right-click the
Local Area Connection icon, and then click Properties.
The Local
Area Connection Properties dialog box is displayed with a
list of currently installed network components. If the list includes
Internet Protocol (TCP/IP), then the protocol has already been
enabled. Skip to step 11.
4. If Internet Protocol (TCP/IP) does not display as an installed
component, click Install… .
5. In the Select Network Component Type dialog box, select Protocol,
and then click Add… .
6. Select Internet Protocol (TCP/IP) in the Network Protocols list, and
then click OK .
You may be prompted to install files from your Windows 2000
installation CD or other media. Follow the instructions to install the files.
7. If prompted, click OK to restart your computer with the new settings.
Next, configure the PCs to accept IP information assigned by the Ericsson
W20:
8. In the Windows task bar, click the Start button, point to Settings, and
then click Control Panel.
9. Double-click the Network
and Dial-up Connections icon.
10. In the Network and Dial-up Connections window, right-click the
Local
Area Connection icon, and then click Properties.
42 1/1551-CRH 102 167 PA15 2006-08-16