Escient VX Network Card User Manual


  Open as PDF
of 22
 
Escient Vision VX-600 Installation Guide
Version: M51003-06A1
8
Conguring VX Server from a PC
Since the Vision VX does not connect directly to a display device, you must connect
to the VX using a computer and web browser connected to the same network. Enter
“vision-vx” into your web browser to locate and connect to your vision server from a
WindowsPC.
The rst time you use Vision you may be prompted to select a language. Vision may
automatically attempt to connect to the Internet through your home network to
register and check for any software updates. If any of these steps fail, simply follow
theonscreeninstructionsasyoufollowthenextsection.
Conguring Multiple VX Servers
If you have more than 1 VX Server in your Vision system you must rename each
serveronebyonesothattheyhavedierentnetworknames.Connect,poweron,
andcongureeachserverONEATATIMEandrenameeach.Forexample,connectto
the rst server using “vision-vx” then rename it to “vx1”.
Repeat the steps for each additional server (connect, power on, and congure)
renaming them: “vx2”, “vx3”, etc....
Language Settings
Select one of the available languages for Vision’s on-screen user interface.
Network Settings
If you connected to your VX using the network name “vision-vx” you can remotely
accessandchangethedefaultTCP-IPaddresssettings.Ifyournetworkissetupto
dynamicallyassignIPaddressesusingDHCP,Visionwillautomaticallydetectyour
network and congure itself. If you want to use static network settings, you will have
tomanuallyenteryourIPaddress,subnetmask,routeraddress,andDNSaddresses.
Followtheon-screeninstructionsformanuallyconguringandtestingyournetwork
settings.
Note: The VX must get an IP address from a DHCP router for initial setup.
6Main Menu
6Language Settings6Network Settings
 previous next