Filter
Top Products
Pressure Systems, Inc. Model 9046 User’s Manual
Page 29 www.PressureSystems.com
psireboot Reboot Specified Module Commands
psirarp Change Specified Module’s IP Address Resolution Method &
Reboot
Note
The commands in this section are quite detailed and involved to
anyone wishing to only use the 9046 module. The commands need
be understood fully only by persons wishing to program software
that talks to the module. If you wish to avoid learning these
commands, use the PSI Windows application program called NUSS
(NetScanner Unified Startup Software) instead. Versions 1.1.11 or
later recognize any 9046 module (with version 2.36 firmware or
later), and provide simple point-and-click methods of executing
most of these commands. In many cases, it configures complex
and useful operating functions by automatically selecting default
command sequences to operate the module. However, it will also
allow you to manually execute each command (singly or in
prepared script files). At the end of each command description
below, there are notes similar to this one, indicating how NUSS
utilizes (or avoids using) that particular command.