Filter
Top Products
Conditioned Power Center
10
2.6 Conformance with Applicable Laws and Regulations
This equipment must be installed and used in accordance with all applicable local, county, state, provincial, and
federal regulations. In the United States, these regulations include, but may not be limited to, those of the NFPA,
NEC, and other regulating bodies. Outside of the United States, other specific laws and regulations may apply.
Compliance with applicable regulations is the responsibility of the installer, user, or owner of the power
conditioner.
2.7 Product Liability
Product liability refers to the liability of any or all parties along the chain of manufacture of any product for
damage caused by the product. Product defects may include inherent design defects, manufacturing defects,
and defects in marketing. The manufacturer of this product has taken every possible precaution to ensure that
design defects do not exist and that manufacturing defects will not occur. Marketing defects generally result from
a lack of proper instructions or failures to warn of latent dangers associated with the product. The manufacturer
has taken great care in preparing this manual to ensure that the documentation is proper, correct, and complete.
However, the manufacturer cannot control how the product documentation is used or how well it is read and
understood. It remains the sole responsibility of the installer, user, and owner of this product to thoroughly review
and understand the documentation that accompanies the product. Those installing, using, servicing, and
maintaining the product should observe all warning notices in both the documentation and on the product and
contact the manufacturer if any part of the installation, use, or service procedures of this product are unclear.
Statutory product liability provisions can be, geographically speaking, very diverse. In the United States, the
Department of Commerce has created a Model Uniform Products Liability Act (MUPLA) for voluntary use by the
states. However, there remains no federal product liability law. For further information consult the products
liability statutes that may apply for the state or country where you reside. Also consult the manufacturer’s
warranty statement in Section 9.3 of this manual concerning implied and expressed warranties of merchantability
and fitness for purpose.
2.8 Emergency Contact Information
In an occurrence requiring emergency assistance from the manufacturer, please call (800) 321-6699. Normal
business hours are 8 am to 5 pm, Central Time. In EMEA, emergency calls should be directed to +44 (0) 1793
553980. Normal business hours for our European operations are 8:00 to 17:00 GMT. Outside of normal
business hours, the manufacturer’s phone systems provide an emergency after hours phone number.
Section 2 - Safety