Filter
Top Products
152 Summit 300-48 Switch Software User Guide
Spanning Tree Protocol (STP)
Disabling and Resetting STP
To disable STP or return STP settings to their defaults, use the commands listed in Table 54.
Table 54: STP Disable and Reset Commands
Command Description
delete stpd <stpd_name> Removes an STPD. An STPD can only be removed if
all VLANs have been deleted from it. The default
STPD, s0, cannot be deleted.
disable ignore-bpdu vlan <name> Allows the switch to recognize STP BPDUs.
disable ignore-stp vlan <name> Allows a VLAN to use STP port information.
disable stpd [<stpd_name> | all] Disables the STP mechanism on a particular STPD,
or for all STPDs.
disable stpd ports <portlist> Disables STP on one or more ports. Disabling STP
on one or more ports puts those ports in forwarding
state; all BPDUs received on those ports will be
disregarded.
unconfig stpd {<stpd_name>} Restores default STP values to a particular STPD or
to all STPDs.