Filter
Top Products
Example Wireless Configuration Process
Summit 300-48 Switch Software User Guide 93
If you enter the wrong number of characters for the code, a message similar to the following
appears.
Invalid number of bytes in key. Expected 10 bytes, got 15 bytes.
8 Configure the security profile to use the 0 key you just defined as the default encryption key.
configure security-profile wep-secure wep default-key-index 0
To configure dot1x security, follow these steps:
1 Create a security profile (dot1x-secure) by copying from the default unsecure profile.
create security-profile dot1x-secure copy unsecure
2 Configure the security profile for all levels of dot1x authentication.
configure security-profile dot1x-secure dot1x authentication all
3 Configure the security profile with the dot1x authentication suite.
configure security-profile dot1x-secure dot1x auth-suite dot1x
4 Configure the security profile to use WEP as the cipher method for multicast messages. This
automatically applies to unicast messages as well.
configure security-profile dot1x-secure dot1x multicast-cipher wep
5 Configure an encryption length of 128 for the security profile. You also need to configure the
RADIUS server for dot1x authentication. There is a special command
enable radius wireless to
enable radius for wireless access. See “Policies and RADIUS Support” on page 88 for more
information.
configure security-profile dot1x-secure encryption-length 128
To assign profiles to ports, follow these steps:
1 Configure interface 1 on port 1:5 to use the RF profile RF_A.
configure wireless ports 1:5 interface 1 rf-profile RF_A
2 Configure interface 2 on port 1:5 to use the RF profile RF_G.
configure wireless ports 1:5 interface 2 rf-profile RF_G
3 Configure interfaces 1 and 2 on port 1:5 to use the wep-secure security profile or the
dotx1x-secure security profile.
configure wireless ports 1:5 interface 1 security-profile wep-secure
configure wireless ports 1:5 interface 2 security-profile wep-secure
OR
configure wireless port 1:5 interface 1 security-profile dot1x-secure
configure wireless port 1:5 interface 2 security-profile dot1x-secure
4 Configure the channel on the A and the B interface. Specifying 0 as the channel indicates that the
least interfering channel should be selected by the interface.
configure wireless ports 1:5 interface 1 channel 0
configure wireless ports 1:5 interface 2 channel 11