Filter
Top Products
3-13CrossPoint Plus Matrix Switchers • Operation
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC RGBHV AUDIO
12
8
CONTROL I/O
B
LED key: = off, = on, = blinking,
3 4
D
3 4
34
E
F
D
E
Hold Hold
Hold
Press
VIEW
F
Hold
BB
Figure 3-13 — Example 5, step d: Muting and unmuting outputs
Using presets
The current configuration (configuration 0) can be saved as a preset in any 1 of 16
preset memory addresses. Each CrossPoint Plus switcher has as many presets
available from the front panel as input buttons. On the CrossPoint Plus 84, 88, 124,
and 128, the extra presets can be saved or stored via the RS-232/422 link only.
1. Only the audio and video ties are stored and recalled; audio gain settings
are not saved, and they do not change when a preset is recalled.
2. Presets cannot be viewed from the front panel unless recalled as the
current configuration. Presets can be viewed using Extron’s Windows-
based control program, see chapter 5, Matrix Software, for more details.
3. The current configuration and all presets are stored in non-volatile
memory. When power is removed and restored, the current configuration
is still active and all presets are retained.
4. When a preset is recalled, it replaces the current configuration, which is
lost unless it is also stored as a preset. The recalled preset overwrites all of
the current configuration ties in favor of the preset configuration ties.