Filter
Top Products
4-5CrossPoint Plus Matrix Switchers • Programmer’s Guide
Command/response table for SIS commands (Cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
List all sync (DSVP) LS Input•Horz.•Vert.
X1
••
X4
•
X4
thru
X1
••
X4
•
X4
Example: LS Input•Horz.•Vert.
01••031.50•060.00 Input 1 (H) 31.5 kHz (V) 60 Hz
thru thru
16••031.50•060.00 Input 16 (H) 31.5 kHz (V) 60 Hz.
I/O Grouping
Write input grouping
Esc
i
X5
…
X5
IWrt One
X5
entry for each input.
Example:
Esc
i42…33 IWrt In1-Grp 4, In2-Grp 2,…In16-Grp 3.
Write output grouping
Esc
o
X5
…
X5
OWrt One
X5
entry for each output.
Read input grouping
Esc
I GrpI
X5
…
X5
One
X5
entry for each input.
Read output grouping
Esc
O GrpO
X5
…
X5
One
X5
entry for each output
RGB delay
Set RGB delay
X6
*
X2
D Out
X2
•Dly
X6
Example: 7*13D Out13•Dly07 Sets the RGB interval for switches
to output 13 to 3.5 sec. (7x0.5 sec.).
Read RGB delay
X2
D Out
X2
•Dly
X6
Example: 13D Out13•Dly05 Output 13 interval is 2.5 sec. (5 x
0.5 sec).
Audio input gain and attenuation
Set audio input gain to +dB value
X1
*
X7
GIn
X1
•Aud=
X9
Example: 1*2G In01•Aud=+02 Set input 1 audio gain to +2dB.
Set audio input attenuation to -dB value
X1
*
X8
gIn
X1
•Aud=
X9
Increment gain up
X1
{G In
X1
•Aud=
X9
Example: 5 {G In05•Aud=+03 Audio input 5 level incremented
from +2dB to +3dB.
Decrement gain down
X1
}G In
X1
•Aud=
X9
Example: 7 }G In07•Aud=-09 Audio input 7 level decremented
from -8dB to -9dB.
Global presets
Save current configuration as preset
X11
, Spr
X11
Command character is a comma.
Example: 9, Spr09 Save current ties as preset 9.
Recall a preset
X11
. Rpr
X11
Command character is a period.
Example:5. Rpr05 Recall preset 5, which becomes
the current configuration.