Filter
Top Products
3-17CrossPoint Plus Matrix Switchers • Operation
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC RGBHV AUDIO
12
8
CONTROL I/O
AUDIO
D
VIEW
D
AUDIORGBHV
E
(9 times)
D
B
B
B
-1dB
LED key: = off (value 0 dB), = blinking (value 1dB),
= on (value 2dB)
Press
Figure 3-18 — Example 8, step d: Adjusting the audio level, CrossPoint
Plus 84, 88, 124, and 128
123
INPUTS
OUTPUTS
RGBHV AUDIO
I/O
VIEW ESC
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8 9 10 11 12
8
9 10 11 12
13
13
14
14
15
15
16
16
TROL
-1dB
5
D
B
B
D
B
LED key: = off (value 0dB), = blinking,
= on (value 1dB)
Figure 3-19 — -1dB displayed, CrossPoint Plus 168 and CrossPoint Plus
1616
If another input button is pressed and released, the level value for the current
input is saved and level value for the newly selected input is displayed.
E
Press and release the Audio button. The Audio LED stops blinking and the
View (
) LED (if lit), the Esc ( ) LED (if lit), the selected input LED, and all
output LEDs turn off.
Both the RGBHV and Audio LEDs light.
Executive mode (front panel security lockout)
The executive mode limits the operation of the CrossPoint Plus switcher from the
front panel. When the switcher is in executive mode, all of the front panel
functions are disabled except for the view-only mode functions (see Viewing a
configuration on page 3-9). Other than in view-only mode, if the user pushes a front
panel button when the switcher is in executive mode, that button’s associated LED
flashes twice and goes out.
To toggle executive mode on or off, press and hold the RGBHV and Audio buttons
for approximately two seconds. The RGBHV and Audio LEDs blink twice to
indicate the mode change. Release the RGBHV and Audio buttons. To toggle the
executive mode state again, press and hold the RGBHV and Audio buttons again.