Extron Headquarters
+1.800.633.9876 (Inside USA/Canada Only)
Extron USA - West Extron USA - East
+1.714.491.1500 +1.919.850.1000
+1.714.491.1517 FAX +1.919.850.1001 FAX
Extron Europe
+800.3987.6673
(Inside Europe Only)
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.299.1800
+971.4.299.1880 FAX
Extron Korea
+82.2.3444.1571
+82.2.3444.1575 FAX
Extron India
1800.3070.3777
(Inside India Only)
+91.80.3055.3777
+91.80.3055.3737 FAX
© 2013 Extron Electronics All rights reserved. www.extron.com
Outline of Installation Steps
Stage 1 — Install the Screen and Projector
c Mark the screen location (page 12).
c Install projector to verify location (page 12).
c Verify the image location (page 15).
c Cut the ceiling tile (page 16).
c Preliminary safety hardware installation (page 16).
c Finish projector drop ceiling mount installation (page 17).
c Secure the projector drop ceiling mount to the ceiling (page 18).
c Install the electrical box (if required) (page 19).
c Install the screen (page 19).
Stage 2 — Mount the PVT Wall Plates and the MLC 104 IP Plus.
c Install the mud rings (page 23).
c Pull cables (at the input locations) (page 24).
c Install the wall plates (page 25).
c Install the MediaLink Controller (page 26).
Stage 3 — Install the FF 120 Speakers.
c Cut the ceiling tile (page 30).
c Install the speaker on the drop ceiling (page 30).
c Terminate the speaker cable for the PVS switcher (page 32).
Stage 4 — Install the PMK 550 and the PVS 305SA IP.
c Install the PMK 550 base plate (page 34).
c Pull the cables (at the switcher location) (page 35).
c Finish installing the pole mount kit (page 36).
Stage 5 — Configure the PoleVault Switcher and the System.
c Configure the switcher — MLS Switcher Configuration program (page 37).
c Configure the system — Global Configurator (page 38).
c Test the system (page 39).
c Final installation (page 41).