Extron electronic CIA111 Switch User Manual


 
CIA111 and CIA114 • Reference Information
Reference Information
CIA111 and CIA114 • Reference Information
A-2
A-3
Specifications
Video
Gain ................................................. Unity
Bandwidth ...................................... 250 MHz (-3 dB)
Video input and loop-through
Number/signal type ..................... 1 VGA–UXGA, Mac, Sun RGBHV, RGBS,
RGsB
1 buffered local monitor loop-through
identical to the input
N
Sync is not stripped from green. RGsB input signals are output
as RGsB.
Connectors ..................................... 2 female 15-pin HD
Nominal level ................................ 0.7 Vp-p for RGB
Minimum/maximum levels ........ Analog: 0.3 V to 1.5 Vp-p with no offset at
unity gain
Impedance ...................................... 75 ohms
Horizontal frequency .................... 30 kHz to 130 kHz
Vertical frequency .......................... 30 Hz to 120 Hz
Return loss ...................................... <-50 dB @ 5 MHz
Video output
Number/signal type ..................... 1 RGBHV, RGBS, RGsB
Connectors ..................................... 5 BNC female on 4" (10.2 cm) pigtails
Nominal level ................................ 0.7 Vp-p for RGB
Minimum/maximum levels ........ Analog: 0.3 V to 1.5 Vp-p
Impedance ...................................... 75 ohms
Return loss ...................................... <-50 dB @ 5 MHz
Sync
Input type ....................................... RGBHV, RGBS, RGsB
Output type .................................... RGBHV, RGBS, RGsB
Input level ...................................... 2.0 V to 5.0 Vp-p
Output level ................................... TTL: 5.0 Vp-p, unterminated
Input impedance ........................... 510 ohms
Output impedance ........................ 75 ohms
Max. propagation delay ............... 1.2 µs
Polarity............................................ Positive or negative (follows input)
Audio
Gain ................................................. Unbalanced output: 0 dB;
balanced output: +6 dB
Frequency response ...................... 20 Hz to 20 kHz, ±0.4 dB
THD + Noise .................................. 0.03% @ 1 kHz at nominal level,
0.1% @ 20 kHz at maximum output
S/N .................................................. >75 dB at maximum output
Stereo channel separation ............ >-113 dB @ 1 kHz to 20 kHz
Audio input
Number/signal type ..................... 1 stereo, unbalanced
Connectors ..................................... (1) 3.5 mm mini stereo jack
Impedance ...................................... >10k ohms unbalanced
Nominal level ................................ -10 dBV (316 mV)
Maximum level .............................. +8.1 dBu, (balanced or unbalanced) at
1% THD+N
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type ..................... 1 stereo, balanced/unbalanced
Connectors ..................................... 1 direct insertion captive screw connector,
5 pole
Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ....................................... ±0.09 dB channel to channel
Maximum level (Hi-Z) ................. >+15 dBu, balanced or unbalanced at
1%THD+N
Maximum level (600 ohm) ........... >+13 dBm, balanced or unbalanced at
1%THD+N
General
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, external,
autoswitchable; to 9 VDC, 0.6 A, regulated
Power input requirements ........... 9 VDC, 0.5 A
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing